BlockBearLifestyle and practical living

Home Assistant Connect AUX-2: What It Adds to an Older Speaker Setup

In a review published on November 12, 2026, the writer tested Nabu Casa’s Home Assistant Connect AUX-2 as a way to bring existing speakers or an older amplifier into a multi-room music setup. The small receiver works with Home Assistant and Music Assistant and supports Sendspin, an open-source audio protocol developed under the Open Home Foundation. At the time of the review, Sendspin had reached version 1.0 RC1; its final 1.0 release was still planned, not yet available.

The AUX-2 has a 3.5 mm output that automatically switches between analog audio and optical digital audio when the appropriate cable is connected. Its gigabit Ethernet port supports Power over Ethernet (PoE), so one cable can provide both power and a network connection. It also has USB, serial and SEEED Studio Grove connections for more involved Home Assistant projects.

A wired connection made the stronger case in this test. With a PoE switch, the reviewer reported that Home Assistant discovered the device and completed initial setup in about half a minute. They found playback stayed synchronized across several devices for hours once buffering finished, but starting a song and changing multi-room groups took longer than expected. Streaming lossless FLAC over a crowded 2.4 GHz Wi-Fi connection could stutter; the reviewer recommended Ethernet where possible. For a setup that must use Wi-Fi, they reported smoother playback after enabling the lower-bandwidth Opus codec in ESPHome Builder, while noting a personal-testing, non-commercial-use restriction for that configuration.

Music Assistant can also bridge other supported speakers into a Sendspin group, including AirPlay, Google Cast and Bluetooth devices, according to the review. That does not make Sendspin a home-theater surround-sound standard: the writer noted that it did not support Dolby and similar surround formats at the time.

The reviewer liked the optical connection in their own setup with an IKEA SOLSKYDD speaker, but found the AUX-2’s ports awkwardly split between its two sides, making cables harder to hide. They also tried a Grove display for track information. Another possible use—remotely attaching a Zigbee or Z-Wave coordinator through USB—comes with a qualification: the review described ZHA’s remote-mount feature as experimental.

The reported price was ¥520, with a ¥450 introductory offer. The reviewer said the AUX-2 was expected to reach SEEED Studio’s official stores on Chinese e-commerce platforms; that was a forthcoming sales plan, not a confirmed listing. For households that already have speakers they want to keep, the practical appeal is clear, but the reviewer’s experience also points to the importance of network conditions and the software’s still-developing status.

Further reading