In a hands-on report published November 12, 2026, The Verge tested the Home Assistant Connect Aux-2, a $69 device from Nabu Casa designed to bring equipment that is not already smart into a Home Assistant setup.

About the size of a deck of cards, the Aux-2 has 2.4GHz Wi-Fi, Bluetooth, Ethernet, USB-A and USB-C ports, an audio jack, a Grove port for peripherals, and two RS-232 serial ports. It can act as a Bluetooth proxy, host a compatible Z-Wave or Zigbee antenna, send audio to an amplifier or powered speakers, or connect to equipment such as TVs and solar inverters through a serial port. It runs on USB-C power or power over Ethernet and uses ESPHome integrations.

The reviewer set it up by installing firmware through a browser, then completing the process in Home Assistant. With Bluetooth proxying enabled, Govee temperature sensors connected through three walls and a garage fridge, restoring a temperature-monitoring setup that had become unreliable with earlier Zigbee sensors.

The reviewer also connected previously unused in-wall speakers to a separately purchased amplifier and played music through Music Assistant. That setup took less than half an hour, including configuring Music Assistant. They had not yet tested serial control or succeeded in grouping speakers across different protocols with Sendspin, which was still in development.

The Aux-2 is not the only route to these features: the reviewer noted that a $35 Apollo Automations Cast-1 supports the music-casting and Bluetooth-proxy functions they had used, while DIY ESP32 hardware offers another option. For this test, the Aux-2’s advantage was making those functions comparatively easy to get running.



